C U R R I C U L U M V I T A E

Prof. D.Sc. Kliment HADJOV

2006 - “Doctor Honoris Causa” of the University of Reims-France

FORMATION

1968 French College “Alphonce de Lamartine” in Sofia.

1973 Master degree –Mechanical Engineering from the Technical University - Sofia.

PROFESSIONAL EXPERIENCE

1975 Assistant Professor dept. Applied Mechanics of the University of Chemical Technology and Metallurgy – UCTM - Sofia.

1981 Doctor degree from the Technical University - Sofia.

1985 Assistant Professor in the UCTM - Sofia.

1990 Associate Professor in the UCTM - Sofia.

2002 Height Doctor Degree from the Technical University - Sofia.

2004 Professor in the UCTM - Sofia

WORKING OUTSIDE BULGARIA

1991 Two years – Professor in the Technical University of Nabeul- Tunisia.

1999 One month - Collaborator in the Technical University of Hamburg, dept. Composite Materials.

TRAINING PERIODS

1982 University of Moscow “Lomonossov” – dept. Theory of plasticity.

1996 « Ecole Centrale de Lyon » , dept. Mechanics of Solids (France).

1997 Technical University of Budapest (Hungary), dept. Mechanics.

1998 Technical University of Hamburg (Germany).

INVITED PROFESSOR

1999 Two weeks in the University of Craiova –Romania.

2000 Two weeks in the University of Craiova –Romania.

PUBLICATIONS (See list of publications):

130 works concerning the mechanics of alloys and composites

a) published in the following journals:

outside Bulgaria

Mechanics of Composite Materials -Riga,

European Journal of Mech.& Environmental Engineering - Brussels,

Journal of Thermal Sciences – France,

Annals of the University of Craiova – Romania,

in Bulgaria

Journal of Theoretical and Applied Mechanics – Sofia,

Journal of the UCTM, Sofia,

Annals of the University of Architecture, Geodesy and Civil Engineering - Sofia,

Annals of the Technical University – Sofia,

Journal of Physicochemical Mechanics – Sofia.

Journal of Technical Ideas - Sofia

b) published in the Proceedings of the following Conferences:

outside Bulgaria

Nitra – Slovakia.

Cambridge – UK.

Merseburg – Germany.

Proceedings of the Conference “Polymer Composites 90” , Petersburg.

Junior Euromat, Lausanne.

BRAMAT, Brashov - Rumania.

ICCE-10, New Orleans, USA.

ECCM-10, Bruges, Belgium.

ECCM-11, Rhodes, Greece.

in Bulgaria

International Conference on Mechanics &Technology of Composite Materials- Sofia.

International Conference on Theoretical and Applied Mechanics - Sofia.

TEXTBOOKS (See full list of textbooks):

Applied Mechanics

Strength of Materials

Mechanical Comportment of Materials (in French)

Mechanics of Materials – edited in Romania (in French)

Theory of Elasticity and Plasticity

Application of the FEM.

Scientific fields:

Composites – mechanical properties, homogenization, damage, failure, rheology - modeling and characterization

Nanofluids – thermal properties of suspensions which contain anisotropic nanophases with different form

Scientifical contracts with international participation:

1999 - Contract SFB 371 “Mikromechanik mehrphasiger Werkstoffe”, Special research programm, Technical University of Hamburg - Germany.

2003 - Contract – Рила 6, №781 – Theoretical and experimental investigation of concrete structures reinforced by composite materials.

2004 - Contract with the University of Reims, France - Investigation of reinforced composite structures

2006 - Contract with the Ministry of Science and Education – Mechanical behavior and effectiveness of structures containing structural defects reinforced by composite materials

2008 - Contract with the Assoc. of the Francophone Universities – Modeling and characterization of the thermal behaviours of suspensions containing nanoinclusions with arbitrary shape

LANGUAGES

French, German, Russian, English.

ADDRESSE:

Professional:

University of Chemical Technology and Metallurgy

Dept. Applied Mechanics

blv. Kl. Ohridski 8,

1756 Sofia - Bulgaria

tel. ++359 2 81 63 464,

E-mail: klm@uctm.edu

Prof. Kliment Hadjov

Publications in scientifical journals in Europe

1.Popov K., Mandichev G.,Hadjov Kl A model for investigation of the relaxation by torsion of polymer in liquid media, Mechanics of Composite Materials N6, Riga, 1979, p.1119-1130.

2.Popov K.,Hadjov Kl Relationships Between Relaxation Characteristics and Creep for Isotropic Materials, Mechanics of Composite Materials, N1, 1980, p.10-15. Translated from Russian in MCMAD7(1)1-130(1980) , vol.16,No1, p.5-10.

3.Hadjov Kl, Popov K., Mandichev G. About one Modification of the Damage Theory, Mechanics of Composite Materials, Riga, N6, 1981, p.1115-1117.

4.Hadjov Kl, Mandichev G., Popov K. Critical Time and Stability Criterion for Viscous Beams, Mechanics of Composite Materials, Riga, N2, 1982, p.284-289.

5.Popov K.,Hadjov Kl. Load-Bearing Capacity of Fragile Orthotropic Plates Under the Conditions of Creep, Fifth International Conference “Deformation, Yield and Fracture of Polymers, Churchill College, Cambridge, 1982, p.69.

6.Popov K.,Hadjov Kl Durée de vie de matériaux orthotropes chargés en dehors des axes, Mechanics of Composite Materials, N3, 1983, p.70-75.

7.Popov K.,Hadjov Kl. Limit Equilibrium of a Unlimited Viscous Plate with Crack, Mechanics of Composite Materials, Riga, N1,1986, p.60-64.

8.Popov K.,Hadjov Kl. A Model to Investigate the Displacement of a Crack in a Plate, VI International Congress “APLICHEM”, Bratislava, Slovaquie, 1988, p.12-17.

9.Hadjov Kl. Popov K. Charactéristiques effectives héréditaires des composites à matrice en polymère, Comptes Rendus “Composites en polymers 90”, partie 1, Petersbourg – Russie, 1990, p.53-56.

10.Hadjov Kl., M.Marin Anisotropic Elasticity for Polylayered Aggregates, Annals of the University of Craiova, N1, 1999, p.62-69.

11.Hadjov Kl. Texture Tensors of Heterogeneous Anisotropic Solids and Homogenization Technique, Annals of the University of Craiova, N6, 2001.

12.Hadjov Kl.&K.G.Popov Anisotropic Elasticity of fibre and poly-layered aggregate rein forced materials European Journal Mech. & Env. Eng. Vol.45, N3, 2000, p.131-137.

13.Hadjov Kl., Orientation of Uni- and Biaxial Particles in a Deforming Matrix with Application to the Drawing Process of High Modulus Polyethylene Fibres, European Journal Mech. & Env. Eng. Vol. 46, N3 , 2001, p.171-177.

14.Hadjov Kl. Tenseurs Effectifs de Conductivité Thermique des Composites a Texture Arbitraire, Journal of thermal sciences, vol.20/4,2002, p.407-416.

15.Hadjov Kl., A.Alexandrov Homogenization of Directionally Solidified Superalloys, Material Weeks, München, 2001.

16.Hadjov Kl. Homogenized Material Tensors in Composite Materials with Arbitrary Texture, Composites For The Future, ECCM-10, Brugge, 2002.

17.Hadjov Kl Généralisation Thermodynamique d’un modèle viscoélastique en 3D, Eur.Journ. of Mech. Eng. Vol.48, N4, 2003, p.225-230.

18.Hadjov Kl., A.Aleksandrov, D.Koleva, Homogenization of Directionally Solidified Anisotropic Crystals, Junior Euromat, Lausanne, 2002.

19.Hadjov Kl., M.Marin Thermodynamical Failure Criterion by Finite Strains, BRAMAT, Brashov, 2003, p.20-23

20.Hadjov Kl., M.Marin Simplification of the elastic matrix of anisotropic solids, BRAMAT, Brashov, 2003, p.24-29.

21.Hadjov Kl., Aleksandrov Al, Gyosheva D. Homogenization technique concerning composites with arbitrary oriented anisotropic phases, ICCE-10, New Orleans, 2003.

22.Hadjov K.B., D.P.Dontchev, Y.Delmas, A.Li Damage Model to Predict the Life -Time in 3D, 17-ème Congrès Français de Mécanique, Troyes, France,2005.

23.Hadjov K.B, Chirtoc M., Henry J.-F. Sur la Conductivité Thermique des Fluides Contenant des Nanoinclusions Quasi-sphériques, 18-ème Congrès Français de Mécanique, Grenoble, France,2007.

Back to CV of Kliment Hadjov

MANUALS - Lectures

1.K.Hadjov Comportement mécanique des matériaux (in French), Ed.Tip-Top Press, Sofia, 2001, p.87.

2.Hadjov Kl,Dontchev D. Résistance des matériaux (in French), Ed.Universitaire de l’UCTM, Sofia, 2001, p.86.

3.Hadjov Kl., Marin M. Mécanique des matériaux, Ed.Universitaria, Craiova, 2002, p.164. (in French – Roumain edition-Craiova, discussed in Roumania in the journal « Obiectif Mehedintean » 16.04.2002.)

4.Hadjov Kl. Théorie de l’élasticité et de la plasticité, Ed.Universitaire de l’UCTM, Sofia, 2001, p.54.

5.Hadjov Kl , Dontchev D. Application des éléments finis en mécanique, Ed.Universitaire de l’UCTM, Sofia, 2003, p.88 – cours spécial pour les doctorants de l’UCTM.

6.Hadjov Kl., Velkov N. Technische Mechanik (in German), UCTM, Sofia, 2008, p.160.

MANUALS – Solving problems

7.Nacheva Z.,Veltchev A., Alexandrov A., Hadjov Kl. Theoretical Mechanics, Ed. of the University - UCTM, 1981.

8.Nacheva Z.,Veltchev A., Alexandrov A., Hadjov Kl. Strength of Materials, Ed. of the University - UCTM, Sofia, 1981.

9.Lasarov P., Alexandrov A, Hadjov Kl., Veltchev A. Theoretical Mechanics, Ed. of the University UCTM, Sofia, 1984.

10.Nacheva Z.,Alexandrov A., Hadjov Kl., Veltchev A. Applied Mechanics, Ed. of the University UCTM, Sofia, 1984.

11.Nacheva Z., Alexandrov A., Veltchev A., Hadjov Kl. Theoretical Mechanics-problems, Ed. of the University UCTM, Sofia, 1984.

12.Nacheva Z., Alexandrov A., Veltchev A., Hadjov Kl. Strength of Materials - problems, Ed.of the University - UCTM, Sofia, 1991.

13.Hadjov Kl., Alexandrov A. Mécanique Appliquée I, Applied Mechanics I - Problems , Ed.of the University - UCTM, Sofia, 1989.

14.Hadjov Kl., Alexandrov A. Applied Mechanics I - Problems , Ed.of the University - UCTM, Sofia, 1991.

Back to CV of Kliment Hadjov